Bang & Olufsen 26-Jun manual System modulator, To switch on the system modulator …

Models: 26-Jun

1 72
Download 72 pages 61.26 Kb
Page 63
Image 63

63

System modulator

Link frequency

MODULATOR SETUP

MODULATOR ON

store GO

LINK FREQUENCY

FREQUENCY 599

FINE TUNE

0

search store GO

If you have an audio setup, such as a BeoLink Active/Passive, and you choose to set up a non-linkable television in the same room, you must set the system modulator to ON. The factory setting is OFF, which must be used if you are using a linkable Bang & Olufsen television.

To switch on the system modulator …

>Press TV to switch on the television.

>Press MENU to bring up the TV SETUP menu and press to highlight TUNING.

>Press GO to bring up the TV TUNING menu, and press to highlight LINK FREQUENCY.

>Press twice, followed by GO. The MODULATOR SETUP menu appears.

>Press or to reveal ON.

>Press GO to store the setting, or …

>… press EXIT to leave all menus without storing.

If, for example, a TV program in your area is broadcasted on the same frequency as the BeoLink system uses, 599 MHz, you must tune the system modulator to an unoccupied frequency. When you change the link frequency in the main room system, make sure that the link frequency in the link room system corresponds to it.

To change the link frequency …

>Press TV to switch on the television.

>Press MENU to bring up the TV SETUP menu and press to highlight TUNING.

>Press GO to bring up the TV TUNING menu and press to highlight LINK FREQUENCY.

>Press GO to bring up the LINK FREQUENCY menu. FREQUENCY is already highlighted.

>Press or to find an unused frequency.

>Press GO to store the setting, or …

>… press EXIT to leave all menus without storing.

Page 63
Image 63
Bang & Olufsen 26-Jun manual System modulator, To switch on the system modulator …, To change the link frequency …