5. Source Selection

5. SOURCE SELECTION
Overview
• Source selection
• Composite Video
• S-Video selection

5.1 Source selection

Selecting a source
TheSource selection menu allows to select one of the different sources. Anothermethod to select an input source is via the remote
controlu sing the numeric keys or by using the local keypad.
How to select a source ?
1. Press MENU to activate the Toolbar
2. Press ↓to Pull down the Source Selection menu
3. Use ↑or ↓to select one ofthe different sources ( Press →to Pull down if the item has a submenu) (image 5-1)
4. Press ENTER to confirm your choice
On the screen appears now the selected source.
Image5-1
A Barco logo on the menu indicates the presence of a signal.
The3 first sources (Data onBNC’s 1, Component Video & RG(s)B) refer to the first 5-cable in put.
When to select “Data on BNC’s1”
SelectData on BNC’s 1 when a data signal is connected to the BNC’s labeled “1”
When to select “Component video” ?
SelectComponent video when a signal of the type (PR/Y/PB)is connected on the BNC’s labeled “1”.
When to select RGsBVideo?
SelectRG sB Video when an RGB video signal with Sync on green or sync on H is presented on the BNC’s labeled “1”
Thissignal is routed to the video circuit and is projected in a Video Window.
When to select “Data on RGB’s2”
SelectData on BNC’s 2 when a data signal is connected to the BNC’s labeled “2”
R5976455 BARCO ULTRA REALITY 7000 30062003 31