Barco R9002790 manual Getting Started

Lamp Light Output Indication	4-2
Switching to Stand-by	4-2
Switching Off	4-2
Input Source Connection	4-3
Input facilities	4-3
Input facilities, RCVDS05 or VS05 connected	4-3
Input module insertion into the projector	4-4
Fixed Slot (slot 1 & 2)	4-5
Optional: Serial Digital Input (slot 3 & 4)	4-7
HD SDI Digital Input (slot 3 & 4)	4-8
Communication Connections	4-9
Available communication connections :	4-9
RS232 Connections	4-9
RS 232/422 input and RS232/422 output of the projector	4-9
Communication port for communication with peripherals	4-9
Connecting a RCVDS 05 to the projector	4-9
Connecting a VS05 to the projector	4-9
Connecting an IR Remote Receiver to the projector	4-9
Trigger output	4-9

GETTING STARTED	5-1
Remote Control & Local Keypad	5-1
Functionality	5-1
Terminology	5-2
Operating the Projector	5-3
Switching on	5-3
Lamp Run Time Indication	5-3
Lamp Run Time Warning	5-3
Lamp Light Output Indication	5-4
Switching to Stand-by	5-4
Switching Off	5-4
Temperature error DMD	5-4
Quick Set Up Adjustments	5-4
Quick Language Change	5-4
Quick Lens Adjustment	5-5
Quick On Screen Color change	5-6
Using the RCU	5-6
Pointing to the reflective screen	5-6
Hardwired Remote Input	5-7
Hardwired to the XLR Input	5-7
Directly to the IR Sensors	5-8
Projector Address	5-8
Why a projector address ?	5-8
Set up an Individual Projector Address	5-8
How to control the projector or projectors ?	5-8
Before using the RCU	5-8
Display the Projector Address on the Screen	5-9
How to Program an Address into the RCU ?	5-9
Controling the Projector	5-9
Input Selection	5-9
Picture Contols	5-9
The Pause key	5-10
The Stand-by key	5-10

START UP OF THE ADJUSTMENT MODE	6-1
Adjustment Mode	6-1
Start up	6-1
Possible Paths	6-1
Password Protection	6-1
Entering the Password	6-1
Remark	6-2
Setting Up the personalised Passwords	6-2
Menus on Local LCD Display	6-2

i-2 R5976336 BARCOSLM R6 Executive 06092001