Random Access Adjustment Mode
Field Polarity :
The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double lines are visible in the image). This can be corrected by forcing the field polarity to [neg] or [pos].
Use the ENTER key to toggle between [pos] and [neg].
Field Select : Default [both]
The field select is only used for interlaced images. One frame of an interlaced image contains two fields, an even and an odd field. The choice exists to project [both] fields on the screen or only the [even] or [odd] field. This can be useful for 3D projection. Use the ENTER key to toggle between [both], [even] and [odd].
Vertical Refresh [sync/async] : The way of updating the image information on the LCD panels.
Not available for
1For sources with a vertical frequency up to 60 Hz : the vertical refresh rate is the same as the vertical frequency of the incoming source. This is a necessity to project moving images without 'motion artifacts'. For stationary images with a vertical frequency up to 60 Hz it is still possible to use asynchronous refresh. When loading Pal, Secam,
2For sources with a vertical frequency higher that 60 Hz : the vertical refresh is different than the vertical frequency of the incoming source. Synchronous refresh cannot be used.
Press EXIT to leave the Edit File Option menu.
A 'Confirm Edit File' menu will be displayed.
CONFIRM
EDIT FILE
Save changes to file
xga.c30?
<ENTER> to confirm
<EXIT> to return
Press ENTER to confirm and to save the new settings or EXIT to return without saving the new entered settings.
Rename a file
Start Up.
To change the name of a selected file:
1Push the cursor key or to highlight 'Rename' (menu 1).
2 Press ENTER.
The Rename selection menu will be displayed (menu 2).
3 Push the cursor key or to select a file name (menu 2). 4 Press ENTER to select.
The Rename menu will be displayed with the selected file name already filled in, in the 'From file name :' area and in the 'To file name :' area.
The first character in the 'To file name :' area is highlighted (menu 3).
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with or
then <ENTER> <EXIT> to return.
menu1
RENAME FILE
Filename Src Resolution
Video525.s01 1 | 675x240i | |
Video525.c01 | 1 | 675x240i |
Video525.c02 | 1 | 675x240i |
Active file : Video525.c50
Select with or
then <ENTER>
<EXIT> to return.
menu2
RENAME FILE
Frome file name :
Video525.s01 To file name : demo.c10
Select with or
Reprogram with or
or numeric keys
<ENTER> to confirm
<EXIT> to return
menu3
| R5976336 BARCOSLM R6 Executive 06092001 | |
|
