Service Mode
SERVICE
IDENTIFICATION
CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION LAMP
MORE...
Select with or
then <ENTER> <EXIT> to return.
BARCO LOGO
STATUS : [ON]
BACKGROUND : [ON]
SHIFT
HOT KEY : [TEXT]
Select with or
<ENTER> to toggle/select
<EXIT> to return.
PRESET INPUT BALANCE
WHITE BALANCE
BLACK BALANCE
DEFAULT
Select with <ENTER>
<EXIT> to return
Adjust
red with or
blue with or
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
DIAGNOSIS
MORE...
Select with or
then <ENTER> <EXIT> to return.
DIAGNOSIS
I2C
FORMATTER
Select with or
then <ENTER>
<EXIT> to return.
Identification
How to display the Identification screen ?
1Push the cursor key or to highlight 'Identification' (menu 1).
2 Press ENTER to display the Identification screen (menu 2.
SERVICE
IDENTIFICATION
CHANGE PASSWORD CHANGE LANGUAGE CHANGE PROJ. ADDRESS SERIAL COMMUNICATION LAMP
MORE...
Select with or
then <ENTER>
<EXIT> to return.
menu1
BARCO
SLM R6
Proj. address : 001 Soft. version : 3.0 Config : front/
ceiling
Baudrate PC : 9600
text : ON
Serial no.: 1010200 Run time : 100 h
Select with or
then <ENTER> <EXIT> to return.
menu2
The information
The following information is available on the identification screen:
-type of projector
-projector address
-software version
-installation configuration
-baud rate
-text ON
-projector serial number
-projector run time
Detailed description
-type of projector : BARCO SLM R6
-software version
-Proj. Address : to change the address of the projector, see Change Projector Address in this chapter.
-Installation : possible installations :
*Front/Ceiling
*Front/Table
*Rear/Ceiling
*Rear/Table
To change the installation configuration, follow the instructions in chapter 'Installation Guidelines'.
-Baud rate : transfer speed for communication with an IBM PC (or compatible) or MAC. The baud rate of the projector must be the same as the baud rate of the connected computer. When there is a difference, consult 'Change Baudrate PC' in this chapter.
| R5976336 BARCOSLM R6 Executive 06092001 | |
|
