Baum Bros. Imports 26.4 manual Block Programming, Possibility of edge trim preadjusting

5.0 Automatic Operation

Block Programming

Selection of Block Programming with key

Block Programming = automatic programming

Blcok Programming is fitted with graphic operator prompting for the automatic generation of a cutting program for printed and unprinted sheets.

The required cutting sizes and remarks are automatically stored in a free pro- gram.

There are 3 variations of Block Programming with up to 8 available block programming modes. The selection of a variation is done by cursor keys.

Variation 1: Size cut with edge trim entry

Consisting of:	1	Angular cut
	2	Four edge trim
	3	Four edge trim with labels
Variation 2:	Size cut with final size entry without edge trim entry (with
	the possibility of edge trim preadjusting)
Consisting of:	1	Final size angular cut
	2	Final size four edge trim
	3	Final size trim with labels
Variation 3:	Size cut with optimisation of final size trim with labels
	without edge trim entry (with the possibility of edge trim
	preadjusting)
Consisting of:	1	Final size optimisation
	2	Four-size trim with labels and trim cuts

Variation 1

Variation 2

(with edge trim preadjusting)

Variation 3

K5B - 10