Baum Bros. Imports 26.4 manual Voltage supply 3 phase 360 420V, 50/60Hz

1.0 Technical Data/Machine Layout/Transport and Installation of the Machine/Safety Relevant Machine Elements

Technical Data

Cutting width	67 cm / 26,38"
Clamp opening	8 cm / 3,15"
Feed depth	67 cm / 26,38"
Power requirement (main motor):
Single phase A C	2,2 kW / 3,1 H.P.
3 phase	2,4 kW / 3,4 H.P.
Net weight	620 kg / 1367 lbs
Width	125 cm / 49,2"
Length	182,5 cm / 71,85"
Height	151,5 cm / 59,64"
Front table length	67 cm / 26,38"
Table height	90 cm / 35,43"
Clamp pressure, min.	200 daN / 440 lbs
max.	1500 daN / 3300 lbs
Knife thickness	9,7 mm / 0,38"
Grinding reserve, max.	2,2 cm / 0,86"
Smallest cut
without false clamp, min.	1,5 cm / 0,6"
with false clamp, min.	5 cm / 1,96"
Backgauge speed	0 - 7 cm/sek.
Knife speed/min.	20

Voltage supply (3 phase) 200 - 240, 50/60Hz

Fusing 3 x 25A

Voltage supply (3 phase) 360 - 420V, 50/60Hz

Fusing 3 x 16A

Voltage supply single phase AC (200 - 240, 50Hz)

Fusing 1 x 32A

Voltage supply single phase AC (210 - 240, 60Hz)

Fusing 1 x 32A

Attention!

The wire cross section of the main power supply according to the coun- trys regulations.

Same regulations according the plug connectors.

Noise emission

Metering of noise level according to DIN EN 13023, LpA (dB):

76,5 with 300 cuts/hour (manual feeding)

79,5 with 600 cuts/hour (manual feeding)

Extraneous and room noise correction has been carried out.

daN = kp

K1 - 11