Baum Bros. Imports 26.4 manual Deposit knife in knife box!! Remove knife guard

6.0 Knife Change

Knife change

The knife change should only be carried out by specially trained

personnel

Tools required: 1 Knife wrench 1 Knife guard

2 Knife holders

Removing the knife

1.Select display "Main menu" (Function survey) with key . Make selection "3 Knife".

Select "2 Knife change"

2.Bring turning knob (i), located beneath the front table, to position "Knife change"

3.Press both cut buttons and keep them pressed until knife bar stops automatically at the lower position

4.Remove knife screw at the very left-hand side; turn knob (i) to "0 - position" < knife bars moves upward >

5.Loosen both knife screws (a) at the two knife bar slots (b).

Screw both handles of the knife guard (c) into the now accessible bolt holes

6.Remove the remaining knife screws (knife is fixed to the knife bar by the two handles)

7.Pull knife guard forward by means of the two handles (de-activate clamping) and pull the knife downward, out of the knife bar.

8.Deposit knife in knife box!! Remove knife guard*

*HANDLE THE KNIFE WITH UTMOST CARE! WHEN TRANSPORTING THE KNIFE WITHOUT KNIFE BOX, USE ALWAYS THE KNIFE GUARD.

position "knife change"

PROGRAMMABLE

i

"0-position"

K6 - 2