Baum Bros. Imports 26.4 manual Example Variation 1, selection Four trim cut, Enter Edge trim

5.0 Automatic Operation

Block Programming

Example: Variation 1, selection: Four trim cut

1.	Select	"Four trim cut"
2.	Menu:	1 Orig. sheet size
		2 Sheet size tables
		3 Lay guide lft / ri

With this menu it is able to enter the original sheet size manually or to select a sheet size from a sheet size table.

3.e.g.: Enter Orig. sheet size

4.Enter Original sheet size X, confirm with key

5.Enter Original sheet size Y, confirm with key

6.or e.g.: Sheet size tables

7.Select left-hand lay side (=default) or right-hand lay side: Example: Select right-hand lay side by means of key

8.Select desired sheet size by means of the cursor keys and confirm with key

Confirm the sheet orientation or turn sheet orientation (observe paper grain)

Menu:	1 Sheet orient. OK
	2 Turn sheet

8.e.g.: Sheet orient. OK

Enter Edge trim

9.Enter "Edge trim width X", confirm with key

10.Enter "Edge trim width Y", confirm with key

11.Finish entry with key "Enter"

< Program data display appears with a graphic window of the current Block Programming variation (visible sheet orientation with order start), see also page K5D - 3 "Graphics OFF">

Four trim cut

K5B - 13