Baum Bros. Imports 26.4 manual Start Up Breakdown Scan Reference Point/Auxiliary Mode

7.0 Malfunctions/Breakdowns

Start - Up Breakdown: Scan Reference Point/Auxiliary Mode

Malfunction:	After machine has been started, display shows
	"SCAN REFERENCE POINT"
Cause:	Machine was shut off during backgauge movement
Remedy:	Scan reference point

1.Select "(1) Reference position scan"

<prompt appears: clear the table >

2.Select "(1) Confirm when table empty"

<prompt appears: go to reference position >

3.Activate electronic handwheel

<backgauge moves to reference point >

Reference run can be interrupted by pressing key

If reference point is found:

<menu display "Correction of basic position" >

4.Check basic position and confirm (see page K5B - 7)

<program data display appears >

Auxiliary mode

If the reference point scanning fails:

1.Turn machine off and on again < menu "Scan reference position" appears >

2.Select "Auxiliary Mode"

3.Select machine type; confirm with

Machine functions possible in Auxiliary Mode:

•cutting

•backgauge movement with handwheel or backgauge movement keys

after turning off the machine:

if reference point scanning fails:

K7 - 3