
USING THE BELKIN WIRELESS NETWORKING UTILITY
Table of Contents | section | 1 | 2 | 3 | 4 | 5 | 6 |
WEP Setup
64-Bit WEP Encryption
1.Select “WEP” from the “Data Encryption”
2.After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually.
A hex (hexadecimal) key is a combination of numbers and letters from
For instance:
AF 0F 4B C3 D4 =
3.Click “Save” to finish. Encryption in the wireless router (or access point) is now set. Each of your computers on your wireless network will now must be configured with the same security settings.
WARNING: If you are using a wireless client to turn on the security settings in your wireless router (or access point), you will temporarily lose your wireless connection until you activate security on your wireless client. Please record the key prior to applying changes in the wireless router (or access point). If you don’t remember the hex key, your client will be locked out of the wireless router (or access point).
N+ Wireless USB Adapter | 34 |