Manually Configuring your Router
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
Setting your Connection Type to Dynamic IP (1483 Bridged)
This connection method bridges your network and ISP’s network together. The Router will obtain an IP address automatically from your ISP’s DHCP server.
1.IP Assigned by ISP – Leave “Yes” if your ISP automatically assigns an IP address. If your ISP assigned a fixed IP address, select “No” and enter assigned values.
2.VPI/VCI – Enter your VPI and VCI parameter here. These identifiers are assigned by your ISP.
3.Encapsulation – Select LLC or VC MUX your ISP uses.
Setting your ISP Connection Type to Static IP (IPoA)
This connection type is also called “Classical IP over A™ ” or “CLIP”, which your ISP provides a fixed IP for your Router to connect to the Internet.
1.IP Address – Enter an IP address assigned by your ISP for the Router WAN interface.
2.Subnet Mask – Enter a subnet mask assigned by your ISP.
3.Default Gateway – Enter a default gateway IP address. If the Router cannot find the destination address within its local network, it will forward the packets to the default gateway assigned by your ISP.
4.VPI/VCI – Enter your VPI and VCI parameter here. These identifiers are assigned by your ISP.
5.Encapsulation – Select LLC or VC MUX (assigned by your ISP).
G Wireless Modem Router | 28 |
