Manually Configuring your Router
Table of Contents | sections | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
6.You will see the Router’s user interface in the browser window. Click “Wireless Bridge” (2) on the
7.Check the box that says, “Enable ONLY specific Access Points to connect” (1).
8.In the field named “AP1” (3), type in the MAC address of your secondary access point. When you have typed in the address, click “Apply Changes”.
9.Bridging is now set up.
Note: It may take up to a minute for the bridged connection to properly establish itself. In some cases, it may be necessary to restart the access point and the Router to initiate the bridge.
(2)
(1)
(3)
G Wireless Modem Router | 40 |
