BENDIX BW2212 manual Replacement Kits

Parts/kits listed are now obsolete and are no longer serviceable through Bendix.

REPLACEMENT KITS

The following five kits contain replacement parts for the Bendix® XVision® Night Vision System. Each of the replacement kits can be ordered through Bendix.

For instructions on installing replacement parts, see the appropriate section of Servicing the XVision System, beginning on Page 10.

AIMING ADJUSTER REPLACEMENT KIT (PIECE NO. 5010079)

The IR camera bracket can only be ordered as a component of the IR camera bracket kit. However, the components that attach to the IR camera bracket to aim and adjust the IR camera can each be ordered in the aiming adjuster replacement kit . The kit includes the items below.

Standoff pivot assembly (QTY 1) – fastens to the IR camera standoff base with a maximum torque of 16 in-lbs.

Standoff base (QTY 1) – fastens to the IR camera bracket with #10 Plastite® Hex® flange head screw and lockwasher with a maximum torque of 18-20 in-lbs.

Aiming adjusters (QTY 2) – latch the IR camera into position on the IR camera bracket and allow the IR camera forward Field of Vision (FOV) to be adjusted horizontally and/or vertically. The adjustment screw head(s) accommodate an E8 external Torx® or a T15 internal Torx® tool. (The aiming adjusters are fastened to the IR camera bracket and torqued to 18 in-lbs. with four #8-32 Hex®/Torx® screws.)

Aiming

Adjusters #8-32

Hex®/ Torx® (18 in-lbs.)

Standoff	#10 Plastite® Hex®
Base
	flange with lock
	washer
	(18-20 in-lbs.)
	Standoff Pivot
	Assembly
	(16 in-lbs.)

FIGURE 15 - AIMING ADJUSTER REPLACEMENT KIT

WINDOW REPLACEMENT KIT (PIECE NO. 5010192)

The window replacement kit includes one replacement IR camera window, o-ring and locking pin. See Figure 16.

HEATER REPLACEMENT KIT (PIECE NO. 5010193)

The heater replacement kit includes one replacement IR camera heater and locking pin. See Figure 16.

Camera Camera

Window Heater

O-ring	Locking
	Pin
IR Camera

FIGURE 16 - IR CAMERA AND CAMERA HEATER

COMBINER MIRROR REPLACEMENT KIT (PIECE NO. 5010190)

The combiner mirror replacement kit includes one replacement combiner. See Figures 17 & 28.

FOLD MIRROR REPLACEMENT KIT (PIECE NO. 5010189)

The fold mirror replacement kit contains one replacement fold mirror. See Figures 17 & 29.

Combiner

Fold Mirror

FIGURE 17 - COMBINER AND FOLD MIRROR

9