BenQ CP120 manual Remote paging operations, Freezing the image, Shutdown

Remote paging operations

You can operate your display software program (on a connected PC) which responds to page up/down commands (like Microsoft PowerPoint) by pressing Page Up and Page Down on the remote control. See "Connecting a computer" on page 16 for details.

Connect the projector to your PC or notebook with a USB cable prior to using this function.

Freezing the image

Press the Freeze button on the remote control to freeze the image. An

icon will display in the lower right corner of the screen. To

release the function, press the Freeze button on the remote control, or the Source (or SOURCE/WIRELESS) button.

This does not remotely control the signal source. It just freezes the currently projected image.

Shutdown

1.Press the POWER button and a prompt message appears. Press the POWER button a second time to turn the projector off.

2.The POWER indicator light flashes orange

and the lamp shuts down, the fans continue to run for the time duration as determined by the Quick Cooling function (see "Quick Cooling (On)" on page 41) to cool down the projector.

To protect the lamp, the projector will not

respond to any commands during the cooling process.

3. Disconnect the power cord from the wall socket.

•Do not unplug the power cord before the projector shutdown sequence is complete or during the cooling down process.

•If the projector is not properly shut-down, you risk damaging the lamp. Do not move the projector whilst the lamp is hot.

Using the projector 27