4. Advance menu
Function | Description |
|
|
|
|
|
| |||
(default setting/ |
|
|
|
|
|
| ||||
value) |
|
|
|
|
|
|
|
|
| |
Mirror (Floor | The projector can be installed behind a screen. In such case, you can use | |||||||||
this function to set the correct orientation of the projected image. Refer | ||||||||||
front) | ||||||||||
to "Choosing a location" on page 12 for more information. | ||||||||||
|
|
|
|
|
|
| ||||
Blank Time | Sets the image blank time when the Blank feature is activated, once | |||||||||
elapsed, the image will return to the screen. |
|
|
| |||||||
(20) |
|
|
| |||||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||||
Source Scan | Sets whether the projector searches automatically for input signals. If the | |||||||||
source scan is On, the projector will scan for input signals until it | ||||||||||
(On) | acquires a signal. If the function is not activated, the projector selects the | |||||||||
| last used input signal. |
|
|
|
|
|
| |||
| Language sets the language for the OSD control menus. The available | |||||||||
| languages are: English, French, German, Spanish, Italian, Russian, | |||||||||
Language | Swedish, Dutch, Polish, Czech, Simplified Chinese, Traditional Chinese, | |||||||||
Japanese, Korean, Thai, Portuguese and Turkish. | ||||||||||
(English) | Use the Keystone |
|
| /3Left or Keystone |
|
| /4Right buttons on the | |||
|
|
|
|
| ||||||
|
|
|
|
| ||||||
| projector, or the 3Left or4Right buttons on the remote control to | |||||||||
| select your desired language. |
|
|
|
|
| ||||
|
|
|
|
|
|
| ||||
Splash Screen | Allows you to select which logo screen will display during projector start- | |||||||||
(BenQ logo) | up. Three modes are available: Default (BenQ logo), black screen or blue | |||||||||
screen. |
|
|
|
|
|
| ||||
|
|
|
|
|
|
| ||||
| A mode for operations in areas like high altitude or high temperature. | |||||||||
| We recommend you use the High Altitude Mode when your | |||||||||
| environment is higher than 3000 feet above sea level, or is hotter than | |||||||||
| 40°C. |
|
|
|
|
|
| |||
| To activate the High Altitude Mode, select On by pressing Left 3/ Right | |||||||||
| 4on the projector or remote control. A confirmation message displays. | |||||||||
| Press Auto. |
|
|
|
|
|
| |||
| We recommend you use the High Altitude Mode by selecting On |
| ||||||||
| when your environment is higher than 3000 feet, or is hotter than 40°C. |
| ||||||||
High Altitude | Do you want to turn on High Altitude Mode? |
| ||||||||
|
|
| Yes | No 5 |
| |||||
Mode (Off) |
|
|
|
|
|
|
|
|
| |
| Next time you turn on the projector, it will show a message pictured | |||||||||
| below as a reminder during the |
|
|
| ||||||
|
|
|
| Current Status |
|
|
| |||
|
|
|
| High Altitude Mode | On |
| ||||
| This mode is used for protecting projector from extreme environment and may cause high |
| ||||||||
|
|
|
|
| fan speed. |
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
Operation under "High Altitude Mode" may cause a higher decibel operating noise level because of increased fan speed necessary to improve overall system cooling and performance.
42 Using the projector
