
Remote control does not work.
Cause | Remedy | |
|
| |
The battery is out of power. | Replace the battery with a new one. | |
|
| |
There is an obstacle between the | Remove the obstacle. | |
remote control and the projector. | ||
| ||
|
| |
You are too far away from the | Stand within 6 meters (~ 20 feet) of the | |
projector. | projector. | |
|
|
Unable to use wireless connection.
Cause | Remedy | |
|
| |
The wireless connection modes | Change the wireless connection mode on the | |
projector by pressing the SWAP or MODE/ | ||
between the projector and computer | ||
SWAP button according to the wireless | ||
do not match. | ||
capability of your computer. | ||
| ||
|
| |
The wireless settings are not properly | Check the wireless settings of your computer. | |
See "Preparing your computer for wireless | ||
configured. | ||
connection" on page 29 for details. | ||
| ||
|
| |
The wireless signal is too weak. | Move the computer to a location with better | |
signal reception. | ||
| ||
|
| |
There are other wireless networks | Press the CH. or AUTO/CH. button to change | |
wireless connection to a different channel and | ||
nearby. | ||
try again. | ||
| ||
|
|
52 Troubleshooting