Shutting down the projector
1. Press I Power and a prompt message appears. Press
I Power a second time to turn the projector off. If you don’t want to turn it off, wait a few seconds for the message to disappear.
2. The Power indicator light flashes orange and the lamp shuts down, the fans continue to run for approximately 90 seconds to cool down the projector.
• To protect the lamp, the projector will not respond to
any commands during the cooling process.
•To shorten the cooling time, you can also activate the
Quick cooling function. See "Quick Cooling" on page 34 for details.
C T
3.Disconnect the power cord from the wall socket.
•Do not unplug the power cord before the projector shutdown sequence is complete or during the cooling down process.
•If the projector is not properly shut down, to protect the lamp, when you attempt to
projector, the fans will run for a few minutes to cool down. Press I POWER again to start the projector after the fans stop.
Menu operation
Using the menus
The projector is equipped with multilingual on screen display (OSD) menus for making various adjustments and settings. You can set your OSD language in the Advance > Language menu before browsing through the menus. There are 17 different menu languages for your choice. See "4. Advance menu" on page 35 for details.
The following example describes the adjustment of the keystone.
1. Press MENU on the projector or remote control to | 4. Adjust keystone values by pressing | ||||
turn the |
| Left/ Right on the projector or | |||
|
|
| remote control. | ||
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2.Use 
Left/ 
Right on the projector or remote
control to select the 
Picture menu.
3.Press 
Up/ 
Down on the projector or remote control to select Keystone.
5.Press 
Up on the projector repeatedly or press MENU once on the remote control to leave and save the setting.
30 Operation
