40 Maintenance
13. Restart the projector.
Do not turn the power on with the lamp cover removed.
7. Pull the lamp from the projector.
• Pulling it too quickly may cause the lamp to break and scatter
broken glass in the projector.
• Do not place the lamp in locations where water m ight splash on
it, children can reach it, or near flammable materials.
• Do not insert your hands into the projector after the lamp is
removed. If you touch the optical components inside, it could
cause color unevenness and distortion of the projected images.
8. As shown in the figure, hold the new lamp and align the two
locators on the lamp with the holes on the projector, and then
insert the lamp all the way into the projector.
9. Connect the lamp connector to the projector.
10. Tighten the screw that secures the lamp.
• Loose screw may cause a bad connection, which could result in
malfunction.
• Do not over tighten the screw.
11. Replace the lamp cover on the projector.
12. Tighten the screw that secures the lamp cover.
• Loose screw may cause a bad connection, which could result in
malfunction.
• Do not over tighten the screw.