Safety Instructions (continued)
7.Never replace the lamp assembly until the projector has cooled down and is unplugged from the power supply.
8.Do not attempt to disassemble this projector. There are dangerous high voltages inside which may cause death if you should come into contact with live parts. The only user serviceable part is the lamp which has its own cover.
Under no circumstances should you ever undo or remove any other covers. Refer servicing only to suitably qualified professional service personnel.
9.Do not block the ventilation holes while the projector is on (even in standby mode):
-Do not cover the projector with any item;
-Do not place this unit on a blanket, bedding or any other soft surface;
-Do not place inflammables near the projector.
If the ventilation holes are seriously obstructed, overheating inside the unit may result in a fire.
10.Do not place this projector in any of the following environments.
-space that is poorly ventilated or confined. Allow at least 50 cm clearance from walls and free flow of air around the projector;
-locations where temperatures may become excessively high, such as the inside of a car with all windows rolled up;
-locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shortening the projector’s lifespan and darkening the image;
-locations near fire alarms;
-locations with an ambient temperature above 40°C / 104°F;
-locations where the altitudes are higher than 3050 meters/ 10000 feet above sea level.
10000
feet
11.When the projector is under operation, you may sense some heated air and odor from its ventilation grill. It is a normal phenomenon and not a product defect.
4 | Safety, regulatory and legal information |
