Billion Electric Company 5100S user manual Multiple PVC Permanent Virtual Circuits Support

Using the standard TCP/IP protocol, the BIPAC 5100S and other UPnP enabled devices can dynamically join a network, obtain an IP address and convey its capabilities to other devices on the network.

10/100M Auto-negotiation Ethernet/Fast Ethernet Interface

This auto-negotiation feature allows the BIPAC 5100S to detect the speed of incoming transmissions and adjust appropriately without manual intervention. It allows data transfer of either 10 Mbps or 100 Mbps in either half-duplex or full-duplex mode depending on the Ethernet network.

Dynamic DNS Support

With Dynamic DNS support, you can have a static hostname alias for a dynamic IP address, allowing the host to be more easily accessible from various locations on the Internet. You must register for this service with a Dynamic DNS client.

Multiple PVC (Permanent Virtual Circuits) Support

The BIPAC 5100S supports up to 8 PVC’s.

ADSL Standards

♦Full-Rate (ANSI T1.413, Issue 2; G.dmt (G.992.1) with line rate support of up to 8 Mbps downstream and 1 Mbps upstream.

♦G.lite (G.992.2) with line rate support of up to 1.5Mbps downstream and 512Kbps upstream.

♦Supports Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt (G.992.1); G.994.1 and G.996.1 (for ISDN only); G.991.1;G.lite (G992.2)).

♦Supports OAM F4/F5 loop-back, AIS and RDI OAM cells.

♦ATM Forum UNI 3.1/4.0 PVC.

♦Supports up to 8 PVCs (UBR, CBR, VBR).

♦Multiple Protocols over AAL5 (RFC 1483).

♦PPP over AAL5 (RFC 2364).

♦PPP over Ethernet (RFC 2516).

DHCP Support

DHCP (Dynamic Host Configuration Protocol) allows individual clients (computers) to obtain TCP/IP configuration at start-up from a centralized DHCP server. The BIPAC 5100S has built-in DHCP server capability enabled by default. It can assign IP addresses, an IP default gateway and DNS servers to DHCP clients. The BIPAC 5100S can now also act as a surrogate DHCP server (DHCP Relay) where it relays IP address assignment from the actual real DHCP server to the clients.

IP Alias

IP Alias allows you to partition a physical network into logical networks over the same Ethernet interface. The BIPAC 5100S supports three logical LAN interfaces via its single physical

6