Billion Electric Company 5100S user manual Configuring Address Mapping

The following table describes the labels in this screen.

LABEL	DESCRIPTION
Start Port No.	Enter a port number in this field.
	To forward only one port, enter the port number again in the End Port No. field.
	To forward a series of ports, enter the start port number here and the end port number
	in the End Port No. field.
End Port No.	Enter a port number in this field.
	To forward only one port, enter the port number again in the Start Port No. field
	above and then enter it again in this field.
	To forward a series of ports, enter the last port number in a series that begins with the
	port number in the Start Port No. field above.
IP Address	Enter your server IP address in this field.
Save	Click Save to save your changes back to the BIPAC 5100S.
Cancel	Click Cancel to return to the previous configuration.

6.6 Configuring Address Mapping

Ordering your rules is important because the BIPAC 5100S applies the rules in the order that

41