(PPPoA and |
|
PPPoE |
|
encapsulation only) |
|
|
|
Select | |
Connection | BIPAC 5100S will try to bring up the connection automatically if it is disconnected. |
|
|
Connect on | Select Connect on Demand when you don't want the connection up all the time and |
Demand | specify an idle |
|
|
Max Idle Timeout | Specify an idle |
| Demand. The default setting is 0, which means the Internet session will not timeout. |
|
|
Subnet Mask | Enter a subnet mask in dotted decimal notation. |
(ENET ENCAP | Refer to the Subnetting appendix in the to calculate a subnet mask If you are |
encapsulation only) | implementing subnetting. |
|
|
ENET ENCAP | You must specify a gateway IP address (supplied by your ISP) when you select ENET |
Gateway (ENET | ENCAP in the Encapsulation field. |
ENCAP |
|
encapsulation only) |
|
|
|
TCP MSS Option | This will increase the current MSS limit to the number specified, hence the tweak test |
(PPPoA/PPPoE, | will report Max Packet Size as the specified number plus 40*. The catch is that every |
Routing mode only) | time your PPPoE disconnects and |
| (Max packet size of 1440) and needs to be entered after PPPoE connects again. This |
| function does not work before PPPoE connects. |
| *Referring to RFC879, the MSS value = MTU - 40, so by limiting the MSS value, |
| you will get limited MTU value. |
|
|
Back | Click Back to return to the previous screen. |
|
|
Apply | Click Apply to save the changes. |
|
|
Cancel | Click Cancel to begin configuring this screen afresh. |
|
|
34