STEPS

CORRECTIVE ACTION

1Make sure you are using Internet Explorer 5.0 and later versions.

2Delete the temporary web files and log in again.

In Internet Explorer, click Tools, Internet Options and then click the Delete Files ...

button.

When a Delete Files window displays, select Delete all offline content and click OK. (Steps may vary depending on the version of your Internet browser.)

A.4 Login Username and Password

I forgot my login username and/or password.

STEPS

CORRECTIVE ACTION

 

 

1

If you have changed the password and have now forgotten it, you will need to upload

 

the default configuration file. This will erase all custom configurations and restore all of

 

the factory defaults including the password.

 

 

2

Press the RESET button for five seconds, and then release it. When the SYS LED

 

begins to blink, the defaults have been restored and the BIPAC 5100S restarts.

 

 

3

The default username is “admin”. The default password is “admin”. The Password and

 

Username fields are case-sensitive. Make sure that you enter the correct password and

 

username using the proper casing.

 

 

4

It is highly recommended to change the default username and password. Make sure

 

you store the username and password in a save place.

 

 

A.5 LAN Interface

I cannot access the BIPAC 5100S from the LAN or ping any computer on the LAN.

STEPS

CORRECTIVE ACTION

1Check the Ethernet LED on the front panel. A LAN LED should be on if the port is connected to a computer or hub. If the 10M/100M LED on the front panel are both off, refer to Section A.1.2.

2Make sure that the IP address and the subnet mask of the BIPAC 5100S and your computer(s) are on the same subnet.

A.6 WAN Interface

Initialization of the ADSL connection failed.

STEPS

CORRECTIVE ACTION

1Check the cable connections between the ADSL port and the wall jack. The DSL LED

70

Page 70
Image 70
Billion Electric Company 5100S user manual Login Username and Password, LAN Interface, WAN Interface