Ethernet interface with the BIPAC 5100S itself as the gateway for each LAN network.

IP Policy Routing (IPPR)

Traditionally, routing is based on the destination address only and the router takes the shortest path to forward a packet. IP Policy Routing (IPPR) provides a mechanism to override the default routing behavior and alter the packet forwarding based on the policy defined by the network administrator.

Protocol Support

PPP (Point-to-Point Protocol) link layer protocol.

-PPP over PAP (RFC 1334).

-PPP over CHAP (RFC 1994).

RIP I/RIP II

IGMP Proxy

ICMP support

MIB II support (RFC 1213)

PPPoE feature

-PPPoE idle time out

-PPPoE dial on demand

Networking Compatibility

The BIPAC 5100S is compatible with major ADSL DSLAM (Digital Subscriber Line Access Multiplexer) providers.

Multiplexing

The BIPAC 5100S supports VC-based and LLC-based multiplexing.

Encapsulation

The BIPAC 5100S series supports PPPoA (RFC 2364 - PPP over ATM Adaptation Layer 5), RFC 1483 encapsulation over ATM, MAC encapsulated routing (ENET Encapsulation) as well as PPP over Ethernet (RFC 2516).

Network Management

Embedded Web Configurator

CLI (Command Line Interpreter)

SNMP manageable

DHCP Server/Client

Built-in Diagnostic Tools

Syslog

TFTP/FTP server, firmware upgrade and configuration backup/support supported

Diagnostics Capabilities

The BIPAC 5100S can perform self-diagnostic tests. These tests check the integrity of the following circuitry:

- FLASH memory

7

Page 7
Image 7
Billion Electric Company 5100S user manual Multiplexing