Billion Electric Company 5100S Dhcp Setup, IP Pool Setup, Wizard Setup Configuration Third Screen

Translation	Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the
	NAT chapter for more details.
Back	Click Back to go back to the first wizard screen.
Next	Click Next to continue to the next wizard screen.

3.11 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain TCP/IP configuration at start-up from a server. You can configure the BIPAC 5100S as a DHCP server or disable it. When configured as a server, the BIPAC 5100S provides the TCP/IP configuration for the clients. If you turn DHCP service off, you must have another DHCP server on your LAN, or else the computer must be manually configured.

3.11.1 IP Pool Setup

The BIPAC 5100S is pre-configured with a pool of 100 IP addresses starting from 192.168.1.100 to 192.168.1.199 for the client machines.

3.12 Wizard Setup Configuration: Third Screen

Verify the settings in the screen shown next. To change the LAN information on the BIPAC 5100S, click Change LAN Configurations. Otherwise click Save Settings to save the configuration and skip to section 3.13.

21