| OPERATING PROCEDURE | PHOTOS |
5. Removing outdoor fan motor | Photo 6 | |
(1) | Remove the cabinet and panels. (Refer to 1.) | Outdoor heat |
(2) | Disconnect the connectors for outdoor fan motor. | |
(3) | Remove the propeller nut. (See Photo 7.) | exchanger tempera- |
(4) | Remove the propeller. (See Photo 7.) | ture thermistor |
(5)Remove the screws fixing the fan motor. (See Photo 7.)
(6)Remove the fan motor.
6. Removing the compressor and |
|
| |
(1) | Remove the cabinet and panels. (Refer to 1.) |
|
|
| Defrost thermistor | ||
(2) | Remove the inverter assembly. (Refer to 2.) |
| |
|
| ||
(3) | Recover gas from the refrigerant circuit. |
|
|
| NOTE: Recover gas from the pipes until the pressure |
|
|
| gauge shows 0 PSIG. |
|
|
| Photo 7 | Screws of the outdoor fan motor | |
(4)Detach the welded part of the suction and the discharge pipe connected with compressor.
(5)Remove the nuts of compressor legs.
(6)Remove the compressor.
(7)Detach the welded part of pipes connected with
valve. (See Photo 8.)
|
| Propeller nut |
Propeller |
| |
|
|
Photo 8
Welded parts of
34
