Chapter 6: Operation
6. Operation
6.1 LED Indicators
Hardened Serial Servers have LED indicators for Power, Serial Server Ready, Ethernet Speed and Link status, and Serial Port status. Figures
2
13
4
Figure 6-1. Front and top panels of the LES421A.
Table 6-1. LEDs and switches on the LES421A serial server.
Number in Figure |
|
|
| |
LED Indicator | Description | |||
|
|
|
| |
1 | (1) | Serial Port LED (P1) | The serial port has an associated LED. The Serial Port LED flashes (green) when data is being transmitted | |
or received on the serial ports. When the LED is illuminated, it indicates the serial port is open. | ||||
|
|
| ||
|
|
|
| |
|
|
| The Ready LED (green) illuminates continuously while the unit is initializing. It flashes once per second | |
2 | (1) | Ready LED | when the system is operating correctly. If the LED is not flashing, it indicates that something is wrong | |
|
|
| (e.g., another device on the network at the same IP address). | |
|
|
|
| |
3 | (1) | Ethernet Link LED | Lights when a connection is made. | |
Flashes when there is data traffic on the Ethernet link. | ||||
|
|
| ||
|
|
|
| |
4 | (1) | Reset switch | A recessed momentary Reset switch is located on the side of the enclosure. To activate the switch, | |
insert a small plastic tool through the hole in the enclosure and press lightly. | ||||
|
|
| ||
|
|
|
| |
Page 42 |
