Black Box KV3304A Rear Panel, ServSwitch Wizard VGA USB, Page, mm Barrel connector, VGA connector

ServSwitch Wizard VGA (USB)

2.5.2 Rear Panel

Figure 2-3 shows the rear panel of the unit. Table 2-2 describes its components:

5V

2.5A

12 11 11 11 11

INDOOR		USER		4			3		2		1
USE												USB 1
ONLY		CONSOLE
												USB 2
			OPTIONS									USB2.0
												SWITCHED
4	5	6	7	8	9	8	9	8	9	8	9	10

Figure 2-3. Rear panel.

			Table 2-2. Rear panel components.
Number		Component	Description
4		2.5-mm Barrel connector	Power input or power supply connects here.
5		(2) USB Type A connectors	Connect the console’s USB keyboard and mouse to these connectors.
6		3.5-mm RCA connector	User console audio port: Connect optional speakers to this connector.
7		RJ-45 port	*Options port: This top 10p10c port is used to allow external control of channel
			switching and also to update the internal firmware when necessary by connecting to
			a computer.
8		(4) USB Type B connectors	Connect to a USB port on each computer.
9	(4) 3.5-mm RCA connectors		Connect to the speaker output socket on each computer (optional connection).
10 (2) USB Type A connectors			Connect to the console's USB 2.0 peripheral devices (optional connection).
11		(4) VGA connectors	Connect to the video output port of each computer.
12		VGA connector	Connect to the console's video monitor

*NOTE: The OPTIONS port uses a 10p10c socket, which can accommodate both 10p10c connectors as well as the much more common 8p8c connectors, which are used on Ethernet leads and patch cables. The pin-outs for both types of connectors are listed in Appendix C.

Page 10 724-746-5500 blackbox.com