Chapter 4: Configuration
4.2 General configuration 4.2.1 Changing hotkeys
ServSwitch Wizard VGA (USB) units use CTRL and ALT as their standard hotkeys. These can be changed if they clash with other software or hardware within the installation.
To change the hotkeys
1Enter the Configuration menu (see Section 4.1 for details).
2Press H to enter the Hotkey menu and then press either:
1 to choose Ctrl + Alt
2 to choose Ctrl + Shift
3 to choose Alt + Shift
4 to choose Right Alt
3Press Enter to accept the setting and return to the main menu section.
4Press E and then Enter to exit the menu and save changes.
4.2.2 Mouse switching
You can enable or disable mouse switching to suit your installation requirements.
To enable/disable mouse switching
1Enter the Configuration menu (see Section 4.1 for details).
2Press U to enter the User Preferences menu and then press either:
1 to Enable mouse switching
2 to Disable mouse switching
3Press Enter to accept the setting and return to the main menu section.
4Press E and then Enter to exit the menu and save changes.
4.2.3 OPTIONS port speed
You can change the speed of the OPTIONS serial port.
To change the OPTIONS port speed
1Enter the Configuration menu (see Section 4.1 for details).
2Press B to enter the Baud rate menu and then press either:
1 to choose 1200
2 to choose 2400
3 to choose 9600
4 to choose 19200
3Press Enter to accept the setting and return to the main menu section.
4Press E and then Enter to exit the menu and save changes.
Page 25 |
