ServSwitch Wizard VGA (USB)
3.2.3 Power in connection
The ServSwitch Wizard VGA (USB) unit is supplied with either a 12.5W (single screen version) or 20W (Multiscreen versions) power adapter. There is no on/off switch on the unit, so operation begins as soon as a power adapter is connected.
To connect the power supply
1 Attach the output lead from the power adapter to the 5V socket on the rear panel of the unit. See Figure
5V 2.5A
INDOOR USE ONLY
USER
CONSOLE
OPTIONS
Figure
2 Connect the IEC connector of the supplied
Figure
3 Connect the power lead to a nearby main supply socket.
Note: Both the unit and its power supply generate heat when in operation and will become warm to the touch. Do not enclose them or place them in locations where air cannot circulate to cool the equipment. Do not operate the equipment in ambient tem- peratures exceeding 104° F (40° C). Do not place the products in contact with equipment whose surface temperature exceeds 104° F (40° C).
Page 18 |