Black Box KV3404A, KV3304A, KV3004A Rear Panel, ServSwitch Wizard VGA USB, Page, Indoor Use Only

ServSwitch Wizard VGA (USB)

2.6.2 Rear Panel

Figure 2-5 shows the rear panel of the unit. Table 2-4 describes its components:

12 11 11 11 11

V4

INDOOR

USE

ONLY

V3

V2

USER

CONSOLE

5V

4A

4 5 6

Number Component

42.5-mm Barrel connector

5(2) USB Type A connectors

63.5-mm RCA connector

7RJ-45 port

4	3	2	1	V1
				USB 1

USB 2

OPTIONS	USB2.0
	SWITCHED

7 8 9 8 9 8 9 8 9 10

Figure 2-5. Rear panel.

Table 2-4. Rear panel components.

Description

Power input or power supply connects here.

Connect the console’s USB keyboard and mouse to these connectors. User console audio port: Connect optional speakers to this connector.

*Options port: This top 10p10c port is used to allow external control of channel switching and also to update the internal firmware when necessary by connectng to a computer.

8	(4) USB Type B connectors	Connect to a USB port on each computer.
9	(4) 3.5-mm RCA connectors	Connect to the speaker output socket on each computer (optional connection).
10	(2) USB Type A connectors	Connect to the console's USB 2.0 peripheral devices (optional connection).
11	(8, 12 or 16) VGA connectors	Connect to the video output ports of each computer.
12	(2, 3 or 4) VGA connectors	Connect to the console's video monitors to enable multiple video streams from each
		computer to be switched to up to four video monitors.

*NOTE: The OPTIONS port uses a 10p10c socket, which can accommodate both 10p10c connectors as well as the much more common 8p8c connectors, which are used on Ethernet leads and patch cables. The pin-outs for both types of

connectors are listed in Appendix C.

Page 12 724-746-5500 blackbox.com