Appendices
Appendix C. Cable pin-outs
The OPTIONS port uses a 10p10c socket which can accommodate both 10p10c connectors as well as the much more common 8p8c connectors, which are used on Ethernet leads and patch cables. The
Serial remote control and flash upgrade cable (8p8c)
8p8c |
| ||
connector |
| 9 way | |
TXD | 6 | 2 | RXD |
RXD | 3 | 3 | TXD |
GND | 2 | 5 | GND |
Serial remote control and flash upgrade cable (10p10c)
10p10c |
| ||
connector |
| 9 way | |
TXD | 7 | 2 | RXD |
RXD | 4 | 3 | TXD |
GND | 3 | 5 | GND |
Multi-head synchronization cable (8p8c)
MASTER end | SLAVE end | ||
8p8c connector | 8p8c connector | ||
TXD | 6 | 3 | RXD |
GND | 2 | 2 | GND |
Multi-head synchronization cable (10p10c)
MASTER end | SLAVE end | ||
10p10c connector | 10p10c connector | ||
TXD | 7 | 4 | RXD |
GND | 3 | 3 | GND |
Page 39 |
