
DUAL-PORT NETWORK POWER SWITCH
4.3 Switch Command/Menu Conventions
When invoking
•All
•
•To select an item from a
•To display the Help Screen, type /H [Enter].
•The ,Y option can temporarily suppress the “Sure?” confirmation prompt. The ,Y option is entered at the end of the command line, immediately following the command or argument. For example, to reset the network port without displaying the “Sure?” prompt, type /T,Y [Enter]. To switch off Plug 2 without the “Sure?” prompt, type /OFF 2,Y [Enter].
4.4 Defining General Parameters
When the “TPS>” prompt appears, type /G [Enter] to display the General Parameters menu (Figure
GENERAL PARAMETERS: |
| |
1. | System Password: | (undefined) |
2. | Site ID: | (undefined) |
3. | Modem Init. String: | ATE0M0Q1&C1&D2S0=1 |
4. | Modem Disc. String: | (undefined) |
5. | Baud Rate: | 9600,N,8,1 |
6. | Command Echo: | Off |
7. | Disconnect Timeout: | 2 Min |
8. | Command Confirmation: | On |
9. | Automated Mode: | On |
10. Button Mode: | On |
A. Default Parameters
Enter Selection or <ESC> to Exit…
Figure 4-3. General Parameters menu (System mode only).
20