DUAL-PORT NETWORK POWER SWITCH
NOTES
If you want to allow a single user to access both switched plugs, assign the same user password to both plugs.
If you want to “split” plug access between two different users (each user controls their own plug), then assign a different user password to each plug.
3.Boot Delay: During a boot cycle, power to the plug is first switched off and then switched back on. The boot delay is the length of time which elapses between the time when power is switched off and the time that power is restored. The boot delay can be 1, 5, 10, 15, 30, or 60 seconds. (Default determined by option switch 2; Factory setting = 5 seconds.)
4.Power Up Default: Determines how this plug will react when the /D (default) command is invoked, or after a power interruption. Each plug can be automatically switched on or off as specified by the
After plug parameters have been defined, press [Esc] to exit from the Plug Parameters menu.
4.6 Network Parameters
To communicate with the
Settings for network parameters depend upon the configuration of your individual network. Please contact your network administrator for appropriate settings, then assign parameters as described in this section.
To access the Network Parameters menu (Figure
24
