Blackberry 8820 Change the order of Wi-Fi profiles, Switch Wi-Fi networks manually

Set the authentication certificate that your device should use to connect to the Wi-Fi network.

Inner link security:

If necessary, set the security protocol that the Wi-Fi network supports for its inner authentication method.

Use hard token:

Set whether you use a hardware token to connect to the Wi-Fi network.

Token serial number:

If you use a software token to connect to the Wi-Fi network, set the token serial number.

Server subject for certificate validation:

If necessary, type the server subject name your device should use to verify that it is connecting to the correct Wi-Fi network.

Server SAN for certificate validation:

If necessary, type the server subject alternative name your device should use to verify that it is connecting to the correct Wi-Fi network.

IMSI:

If your SIM card has more than one IMSI, set the IMSI that you use to connect to the Wi-Fi network.

Change the order of Wi-Fi profiles

1.In the device options, click Wi-Fi Connections.

2.Highlight a Wi-Fi® profile.

3.Press the Menu key.

4.Click Move.

5.Roll the trackball to the new location.

6.Click the trackball.

Switch Wi-Fi networks manually

By default, your BlackBerry® device switches to an appropriate Wi-Fi® network automatically when you move between Wi-Fi coverage areas.

1.In the device options, click Wi-Fi Connections.

2.Set the Wi-Fi Selection Mode field to Manual.

3.Click a Wi-Fi profile.

4.Press the Menu key.

5.Click Save.

To connect to the first available Wi-Fi network in your Wi-Fi profile list automatically, set the Wi-Fi Selection Mode field to Automatic.

Prevent your device from connecting to a Wi-Fi network

1.In the device options, click Wi-Fi Connections.

2.Highlight a Wi-Fi® profile.

3.Press the Menu key.

4.Click Disable.

To allow your BlackBerry® device to connect to the Wi-Fi network again, press the Menu key. Click Enable.

226