Body Solid FID 46 manual Four 38 flat washer 8mm

S T E P

3

Be careful to assemble all components in the sequence they are presented.

A.See Note 1. Install all four handles (K, L, M, and N) on to seat braces (H) and back braces (J). Install as shown and described using:

eight 26 (hex bolt 10mm x 40mm full thread) sixteen 36 (flat washer 10mm)

eight 32 (nylon lock nut 10mm)

B.Install seat pad (P) on to both seat braces (H). Tighten pad bolts to a snug fit. Do not

over-tighten any pad bolts. Over-tightening pad bolts will cause T-nuts in pads to strip out. Install using: four 30 (hex bolt 8mm x 60mm partial thread)

four 37 (spring lock washer 8mm) four 38 (flat washer 8mm)

C.Install back pad (Q) on to both back braces (J). Tighten pad bolts to a snug fit. Do not over-tighten any pad bolts. Over-tightening pad bolts will cause T-nuts in pads to strip out. Install using:

four 30 (hex bolt 8mm x 60mm partial thread) four 37 (spring lock washer 8mm)

four 38 (flat washer 8mm)

mm

Inch

7