D623 Series/D625 Series User's Guide Keypad Adjust (Cmd 49)

Keypad Adjust (Cmd 49)

￿I can perform this command.

￿I cannot perform this command.

Use Command 49 to adjust the keypad sounder volume and the display brightness.

1.Press [CMD] [4] [9]. Enter a valid passcode if prompted.

2.To adjust the keypad sounder volume, press and hold the [*] key and then press [1] to increase the volume or [4] to decrease the volume.

3.To adjust the keypad display brightness, press and hold the [*] key and then press [3] to increase the brightness or [6] to decrease the brightness.

4.Press [CMD] to exit this command function when all adjustments are made.

Turn the System Off

Entry Delay Time (to be filled in by your security company).

You have __________ sec. to enter premises and turn

system off.

Enter your passcode to turn the security system off. When the system is on, you must enter through a designated entry door to prevent an alarm. Opening a designated door, such as the Front Door, starts the entry delay. During entry delay time, the keypad emits a double tone to remind you to turn the system off. Enter your passcode before the entry delay time expires to turn the system off.

If you enter through the wrong door or fail to turn the system off before the entry delay time expires, you may cause an alarm. If an alarm occurs, silence the alarm by entering your passcode and call your security company to let them know that there is no emergency situation.

1.When the system is on, the On indicator illuminates. If the system is All On, the keypad display shows:

Smiths Residence

All On

If the system is Part On, the keypad display shows (Part 2 On shows if the system is Part 2 On):

Smiths Residence

Part On

2.Enter your passcode to turn the system off. Once the system is off and there are no faulted points, the keypad displays the idle text (second line) as shown below:

Smiths Residence

OK for All On

Turn the System All On (All On or Cmd 1)

Exit Delay Time (to be filled in by your security company).

You have __________ sec. to exit premises before

system turns on.

Use this command to turn on the entire system. Once you press the [ALL ON] key or enter Cmd 1, the Exit Delay timer starts its countdown. The length of exit delay is programmed by your security company.

When your system is ready to turn All On, it displays OK for All On, indicating all points are normal, such as no open doors or windows and no one standing in front of a motion detector.

Smiths Residence

Ok for All On

If your keypad displays a message indicating the system is not ready to arm (such as Not Ready to Arm), check all doors and windows to see if any are open or if someone or something is in front of a motion detector. If all protected doors and windows are closed and no motion detectors are blocked and the keypad still displays Not Ready to Arm, contact your security company for assistance.

In the example below, the exit delay is 60 sec. Leave before the exit time expires. Leaving after exit delay expires causes an alarm event.

1.Make sure all points are normal (not faulted). If your system has a faulted point (door/window open), you can either close it or bypass it (see Bypass Points 1 on page 18).

2.Press [ALL ON] or [CMD] [1]. The keypad may prompt you to enter a valid passcode.

10

Bosch Security Systems 9/04 46841E

Page 9 Page 11
Page 10
Image 10
Bosch Appliances D623, D625 manual Keypad Adjust Cmd, Turn the System Off, Turn the System All On All On or Cmd
Page 9 Page 11

D623, D625 specifications

Bosch Appliances has long been synonymous with innovation, quality, and performance in the household appliance sector. Among their stellar offerings, the Bosch D625 and D623 dishwashers stand out due to their unique features and cutting-edge technologies.

The Bosch D625 dishwasher is particularly known for its spacious design and efficient cleaning capabilities. With a capacity of up to 16 place settings, it is perfect for larger households or those who frequently entertain guests. One of its key technologies, the PrecisionWash system, utilizes intelligent sensors that continuously scan the dishes throughout the cycle. This ensures optimal cleaning performance, adjusting water pressure and temperature as needed for superior results.

Additionally, the D625 offers a range of wash cycles, including a quick wash for busy days and a heavy-duty cycle for tougher, baked-on food. The EcoSilence Drive motor operates quietly, making it one of the most silent dishwashers in its category, allowing you to run it any time without disturbance.

On the other hand, the Bosch D623 model also boasts impressive capacity and features. Similar to the D625, it has the flexibility to accommodate 14 place settings and comes equipped with the efficient PrecisionWash technology. The D623 is distinguished by its adjustable upper rack, allowing users to customize the interior layout for odd-shaped or oversized items.

Both models emphasize energy efficiency, complying with stringent energy standards. The Energy Star rating means they consume less water and power compared to standard dishwashers, making them both environmentally friendly and cost-effective.

In terms of design, both dishwashers incorporate a sleek stainless-steel finish that adds a modern touch to any kitchen. The intuitive control panel is user-friendly, featuring a digital display that allows easy selection of cycles and options.

Overall, the Bosch D625 and D623 dishwashers exemplify Bosch's dedication to bringing technology and convenience into the kitchen. With an array of features designed to enhance the user experience, these models remain a top choice for homeowners seeking reliability, efficiency, and exceptional cleaning performance in their dishwashing appliances.
Top Page Image Contents