Bosch Appliances D625, D623 manual Turn the System On with No Exit Tone Delay Silent

D623 Series/D625 Series User's Guide Turn the System On with No Exit Tone (Delay Silent)

2.Press [ALL ON] if you want to turn the system All On, or press [PART ON] if you want to turn the system Part On. Press [CMD] [3] if you want to turn the system Part 2 On. The keypad may prompt you to enter a valid passcode.

3.Enter your passcode if necessary. The keypad display shows the following for turning the system All On:

60 seconds to All On.

To bypass points

Press Bypass.

For no delay

Press No Delay.

Pressing [NO DELAY] begins a 10-sec. “last chance” window in which you have 10 sec. to decide if you want to allow the system to arm. During this window, the display scrolls through the following messages: No exit time! System arming. Do not exit! If you decide not to allow the system to arm, enter your user passcode.

If all points are normal, the display shows the following for Part On (the display shows Part 2 On if the system is Part 2 On):

60 seconds to Part On.

To bypass points press Bypass.

For no delay

Press No Delay.

4.To turn the system on (All On, Part On, or Part 2 On) with no delay, press [NO DELAY].

The keypad scrolls the following for All On:

No exit time!

System arming.

Do not exit!

Enter code to turn system off

Smiths Residence

All On

On with No Delay

The keypad scrolls the following for Part On (the display shows Part 2 On if the system is Part 2 On):

No exit time!

System arming.

Do not exit!

Enter code to turn system off

Smiths Residence

Part On

On with No Delay

5.When the system is All On with No Delay, the keypad displays the following:

Smiths Residence

All On

On with No Delay

If the system is Part On or Part 2 On with No Delay, the keypad displays the following (the display shows Part 2 On if the system is Part 2 On):

Smiths Residence

Part On

On with No Delay

The On indicator turns on and blinks, indicating the system is on with no delay.

6.To turn the system off, enter your passcode.

Turn the System On with No Exit Tone (Delay Silent)

Use this command to turn the entire system All On, Part On, or Part 2 On without any exit tones. Remember that turning the system on with no exit tone eliminates the tone emitted by the keypad intended to alert occupants that the system is about to arm.

This command is useful when you wish to arm the system, but not disturb the occupants while the system counts down prior to arming.

1.Make sure all points are normal (not faulted).

2.Press and hold the appropriate key to silence the exit tone. The keypad may prompt you to enter a valid passcode.

Bosch Security Systems 9/04 46841E 13