Bosch Appliances D625, D623 manual View Faulted Points, Bypass Points

D623 Series/D625 Series User's Guide View Faulted Points

View Faulted Points

To correctly turn your system on, all doors and windows must be in the normal (not faulted) condition. Use this command to locate faulted points.

1.Ensure the system is turned off (On indicator off).

2.Press [*]. If points are faulted the keypad displays the following:

System OK	or	Point faulted,
		Press 0 to view

3.If there are faulted points, press [0] to view. The keypad scrolls through all faulted points:

Pt2 faulted,

Front Door

To bypass Pt2

Press 2 + *

Pt7 faulted,

Back Door

To bypass Pt7

Press 7 + *

4.Return the faulted points to the normal condition (like close the front door), or you may choose to bypass the points by following the displayed instructions (such as Press [2] [*]).

5.Once the points return to normal or are bypassed, the system is ready to turn on.

Bypass Points

￿I can perform this command.

￿I cannot perform this command.

Use this command to bypass one or more points before turning the system All On, Part On, or Part 2 On. You can access a bypassed point when the system is armed without activating an alarm.

Example: Your kitchen was just painted and you want to leave the windows open but still turn the system on. Bypassing points allows the system to be on, but prevents it from monitoring undesired areas.

1.Ensure that the system is turned off (On indicator is off).

2.Press the [BYPASS] key. The keypad may prompt you to enter a valid passcode.

3.Enter your passcode if necessary. The keypad scrolls all zones that can be bypassed:

Pt1,

Front Door

To bypass Pt1

Press 1 + *.

Pt2,

Back Door

To bypass Pt2

Press 2 + *.

4.Enter the Point Number that you want to bypass followed by [*] (for example, if you want to bypass Point 10, enter [1] [0] [*]). Repeat this step to bypass all desired points.

If a point is already bypassed, the keypad displays:

Pt3

Hallway

To unbypass 3

Press 3 + *

If a point is faulted, the keypad displays the point number. If the point is bypassable, the keypad prompts you to press the point number followed by the [*] key. If the point is unbypassable, the display tells you the point cannot be bypassed.

5.Press [CMD] to exit this command function. Press [CMD] to exit this command function.

Bosch Security Systems 9/04 46841E 15