![](/images/new-backgrounds/1009420/942063x1.webp)
D623 Series/D625 Series User's Guide Basic Pager Reports
Table 7: Character Code Information
Display | Description | |
A# | Area number | |
Pt## | Point number | |
|
| |
Dv### | Device number | |
Ln## | Phone line number | |
|
| |
Mn# | Minutes until Auto Arm Sked | |
Cd## | User Code number | |
|
| |
Op## | Output number | |
Ks## | Keyswitch number | |
|
| |
U## | User number | |
|
|
##Communication status for Routing Destinations 1 and 2
- (dash) | Destination disabled |
AAborted
DDeleted from pending buffer by control panel reset
FFaulted
LLocal
PPending
SSent
Basic Pager Reports
A pager’s display can show up to four fields of information in the following order:
Figure 7: Pager Display format
(Account Number) - (Event Number) - (Area Number) - (Point/User Number)
•Account Number:
•Event Number: Panel event numbers. See Panel Event Descriptions on page 43 for information on control panel events.
•Area Number: Area number the faulted point is assigned to.
•Point/User Number: Point number assigned to the faulted point. This field can also show a User ID number.
Depending on its configuration, your pager can display any combination of the four fields shown in the order above with or without field separators. For example:
•Account Number: 1234
•Event Number: 08
•Area Number: 02
•Point Faulted: 21
A pager display configured to show all four fields with separators using the sample information from above would look like:
A pager display configured to show all four fields without separators using the sample information from above would look like:
1234080221.
Contact your security company to modify pager display configuration.
•User IDs 1 to 32 are reserved for system user.
•User ID 252 is reserved for sked operation.
•User ID 253 is reserved for remote telephone communication.
•User ID 254 is reserved for remote programming communication.
•User ID 255 is reserved for keyswitch operation.
32 | Bosch Security Systems 9/04 46841E |