Bosch Appliances D623, D625 manual Date and Time Cmd, Change Passcode Cmd

D623 Series/D625 Series User's Guide Date and Time (Cmd 45)

Date and Time (Cmd 45)

￿I can perform this command.

￿I cannot perform this command.

Use this command to program the system date and time.

1.Ensure that the system is turned off (On indicator is off).

2.Press [CMD] [4] [5]. The keypad may prompt you to enter a valid passcode.

3.Enter your passcode if necessary. The keypad displays.

Please Enter

Date and Time

MM/DD/YY HH:MM 01/01/01 00:01

4.Enter the date and time using the numeric keys in MM/DD/YY, HH:MM format.

Figure 5: Date and Time format

___	___	/ ___	___ / ___		___	___ ___ : ___ ___
M	M	D	D	Y	Y	H H	M M
	1		2		3	4	5

1 - Month of the year

2 - Day of the month

3 - Current year

4 - Hour of the day

5 - Minute of the hour

5.The keypad displays both the date and time you entered before returning the keypad to the normal display. In this example, the keypad displays.

Current Date 04/16/01

Current Time 13:35

The keypad returns to the normal display.

In the event of a power cycle (power is lost to the system and then restored), the control panel takes the last event in the log and uses that as a starting point for the time and date. It then alerts you to enter the current time and date.

Change Passcode (Cmd 55)

￿I can perform this command.

￿I cannot perform this command.

Use this command to change your passcode at any time. However, only use this feature under the direction of your security company. The system must be off in order to use this command.

Write down your new and old passcode before you begin.

1.Ensure that the system is turned off (On indicator is off).

2.Press [CMD] [5] [5]. The OK tone sounds and the keypad displays:

Please enter old code

3.Enter your current passcode. As you enter your passcode, the keypad displays:

Entering Code

***

4.If the passcode you have entered is valid, you are prompted to enter your new passcode:

Please enter new code

5.Enter a new passcode with the same number of digits as your old passcode. If the error tone sounds, try a different new passcode. As you enter your new passcode, the keypad displays:

Entering Code

***

6.If you have entered a valid new passcode, the keypad prompts you to enter the new passcode again:

Please enter new code again

7.Enter your new passcode again. As you enter your new passcode, the keypad displays:

Entering Code

***

8.The keypad displays the following to confirm you have successfully changed your passcode:

Code changed

The keypad returns to the normal display.

16 Bosch Security Systems 9/04 46841E