![](/images/new-backgrounds/1009420/942055x1.webp)
D623 Series/D625 Series User's Guide Change Outputs (Cmd 54)
9.You now decide that you do not want this sked to activate on Monday. To remove Monday, press [2].
Sk6 | 1 2 3 4 5 6 7 8 |
Days | - - T W R F S - |
10.Press [CMD] when you are done changing the sked.
Change Outputs (Cmd 54)
I can perform this command.
I cannot perform this command.
Use this command to turn on and off the outputs programmed by your security company. These outputs can control outside lighting, pool pumps, watering systems, etc.
1.Ensure the system is turned off (On indicator is off).
2.Press [CMD] [5] [4]. The keypad may prompt you to enter a valid passcode.
3.Enter your passcode if necessary. The keypad scrolls:
Turn all Outputs
Off? Press 0*
Output 1 is On
To turn Off
Press 1*
4.Press [0] [*] if you want to turn all outputs off, or press the output number you want to turn off followed by [*]. For example, if you want to turn Output 1 off, you press [1] [*]. The keypad displays:
Output 1 is Off
To Turn On
5.Press [CMD] to return the keypad to the normal display.
Remote Program (Cmd 43)
I can perform this command.
I cannot perform this command.
Use this command to connect to your security company’s remote PC computer for programming alterations via the telephone line.
Only use this command when your security company instructs you to.
1.Ensure the system is turned off (On indicator is off).
2.Press [CMD] [4] [3]. The keypad may prompt you to enter a valid passcode.
3.Enter your passcode if necessary. The keypad displays:
Remote Program in progress.
If your system is busy and cannot call your security company’s remote PC computer, the keypad displays:
System Busy.
Try again later.
4.The keypad automatically returns to the normal display when programming is complete.
All Areas Off (Cmd 81)
I can perform this command.
I cannot perform this command.
Depending on the areas assigned to your authority level, this command turns off all areas at the same time when the system is split into more than one area.
1.Press [CMD] [8] [1]. The keypad may prompt you to enter a valid code.
2.Enter your passcode if necessary. The keypad indicates that all areas are off.
All Areas On (Cmd 80)
I can perform this command.
I cannot perform this command.
Depending on the areas assigned to your authority level, this command turns on all areas at the same time when the system is split into more than one area.
1.Press [CMD] [8] [0]. The keypad may prompt you to enter a valid passcode.
2.Enter your passcode if necessary. The keypad displays:
All Areas All On
Exit Now!
If an area has a faulted point(s) when you try to turn all areas All On, the keypad scrolls:
Area 2 not ready
Smiths Residence
Area 4 not ready
Smiths Residence
To force area on hold All On key.
To stop, press Cmd.
3.If you hold down the All On key for 2 sec., it forces all areas to All On.
All Areas All On
Exit Now!
28 | Bosch Security Systems 9/04 46841E |