Bosch Appliances LTC 9420 Table Of Contents, Unpacking, Installation, Service Centers

TABLE OF CONTENTS
1	UNPACKING	4
2	SERVICE	4
3	INSTALLATION	4
3.1	Model Designation	4
3.2	Recommended Mounting Equipment	5
3.3	Wall Mounting	5
3.4	Camera/Lens/Enclosure Mounting	5
3.5	Electrical Connections	5
3.6	Grounding Connection	5
3.7	Connector Assembly	5
3.8	Pan Stops (345° Models)	7
4	OPERATION	7
4.1	Manual Pan Operation (345° Models)	7
4.2	Auto-Pan Operation (345º Models)	7
4.3	Pan Stop Adjustment (345° Models)	8
4.4	Pan Operation (360° Models)	8
4.5	Tilt Stop Adjustment (All Models)	8
4.6	Pre-Position Models	8
5	WIRING DIAGRAMS	9
6	RECOMMENDED APPLICATIONS	12
7	DIMENSIONAL OUTLINE	12

1 UNPACKING

This electro-mechanical equipment should be unpacked carefully and handled with care.

Check for the following items:

•Model number of unit.

•3/32-inch Allen wrench.

•Connector Kit 315 1232 001

If an item appears to have been damaged in shipment, replace it properly in its carton and notify the shipper. If any items are missing, notify Bosch Security Systems.

The shipping carton is the safest container in which the unit may be transported. Save it for possible future use.

2 SERVICE

If the unit ever needs repair service, the customer should contact the nearest Bosch Security Systems, Inc. Service Center for authorization to return and shipping instructions.

Service Centers

U.S.A.: 800-366-2283 or 408-956-3895

Fax: 800-366-1329 or 408-956-3896

Email: NationalServiceCenter@ca.slr.com

Canada: 514-738-2434

Europe, Middle East & Asia Pacific Regions 800-366-2283

For additional information, see

www.boschsecuritysystems.com

3 INSTALLATION

This installation should be made by a qualified service person and conform to all local codes.

Always disconnect power to unit at controller prior to connecting or disconnecting pan/tilt electrical connector. Pan/tilt to be mounted away from unauthorized access [3 meters (10 feet) high minimum]

These units are designed for either upright or inverted installations. To maintain weatherproof integrity when mounting outdoors in an inverted position, the unit must be installed in a weatherproof enclosure (e.g., weather-proof domed housing) or a protected outside area.

Pan/tilts and associated equipment should be tested prior to field installation to verify proper wiring and operation of components.

LTC 9418 & LTC 9420

The maximum load is 10kg (22lb) or 149kg-cm (129lb-in) torque at a distance of 63.5mm (2.5in) from the center of mass of the camera/lens/housing assembly to the center of the tilt table.

LTC 9440 & LTC 9441

The maximun load is 18kg (40lb) or 297kg-cm (260lb-in) torque with center of mass located 3.12in (79.2mm) from the center of the tilt table.

The combined weight of the enclosure/camera/lens should be centered equally, front to back, on the tilt table surface for best pan/tilt operation.

See RECOMMENDED APPLICATIONS.

3.1Model Designation

LTC 9418 Series	Load Rating:
	22lb Load (10Kg), 129lb-in (149kg-cm) torque
	Wiring: Standard	Power Required: 24W
LTC 9420 Series	Load Rating:
	22lb Load (10Kg), 129lb-in (149kg-cm) torque
	Wiring: Feed-thru	Power Required: 24W
LTC 9440 Series	Load Rating:
	40lb Load (18kg), 260lb-in (297kg-cm) torque
	Wiring: Standard	Power Required: 20W
LTC 9441 Series	Load Rating:
	40lb Load (18kg), 260lb-in (297kg-cm) torque
	Wiring: Feed-thru	Power Required: 20W
	Rated Motor Voltage	Voltage Range
/60 models*:	120VAC, 60Hz	108 to 132
/20 models*:	24VAC, 60Hz	21.6 to 26.4
* 40lb Models	24VAC, 60Hz	23 to 26.4
/10 models:	24VAC, 50Hz	21.6 to 26.4
/50 models:	220VAC, 50Hz	207 to 253

Pan Range: 0° to 345° on standard models, 0° to 360° on Continuous Pan models. Pre-position is designated as -/x1, e.g., LTC 9441/61

4