72 en Advanced Mode | DinionHD 720p IP Camera |
|
|
iSCSI Media
If an iSCSI system is selected as the storage medium, a connection to the desired iSCSI system is needed to set the configuration parameters.
The storage system selected must be available on the network and completely set up. Amongst other things, it must have an IP address and be divided into logical drives (LUN).
1.Enter the IP address of the required iSCSI destination in the iSCSI IP address field.
2.If the iSCSI destination is password protected, enter this into the Password field.
3.Click the Read button. The connection to the IP address is established. The Storage overview field displays the logical drives.
Local Media
The supported local recording media is displayed in the storage overview field.
Activating and Configuring Storage Media
The storage overview displays the available storage media. Select individual media or iSCSI drives and transfer these to the Managed storage media list. Activate the storage media in this list and configure them for storage.
Note:
Each storage medium can only be associated with one user. If a storage medium is already being used by another user, decouple the user and connect the drive to the camera. Before decoupling, make absolutely sure that the previous user no longer needs the storage medium.
1.In the Recording media section, click the iSCSI Media or Local Media tab to display the applicable storage media in the overview.
2.In the Storage overview section,
Bosch Security Systems |
