DinionHD 720p IP Camera | Advanced Mode en 83 |
|
|
9.6.3VCA configuration- Profiles
Configure two profiles with different VCA configurations. Save profiles on your computer's hard drive and load saved profiles from there. This can be useful if testing a number of different configurations. Save a functioning configuration and test new settings. Use the saved configuration to restore the original settings at any time.
1.Select a VCA profile and enter the required settings.
2.If necessary, click Default to return all settings to default values.
3.Click the Save... to save the profile settings to another file. A new window opens in which to specify the file name and where to save it.
4.Click Load... to load a saved profile. A new window opens in which to select the profile file and specify where to save the file.
To rename a profile:
1.To rename the file, click the icon to the right of the list field and enter the new profile name in the field. (Do not use any special characters, for example &.)
2.Click the icon again. The new profile name is saved.
The current alarm status is displayed for information purposes.
Aggregation time [s]
Set an aggregation time of between 0 and 20 seconds. The aggregation time always starts when an alarm event occurs. It extends the alarm event by the value set. This prevents alarm events that occur in quick succession from triggering several alarms and successive events in a rapid sequence. No further alarm is triggered during the aggregation time.
The
Bosch Security Systems | Installation and Operation Manual |
