0 0 0 0
Figure 32/llus. 32
Figure 33/llus. 33
36Special Features I Caracteristiques
rEnglish
(Special Features, Continued)
Premium Dispenser
1) Press and hold the
button. The LED display wilt show a number between 0 and 6.
2)If your dishes are streaked after wash- ing, press the
button until the display shows a lower number.
3)If your dishes are spotted after washing, press the
Delay Start
This feature allows you to delay the start of
the selected wash cycle for up tp 19 hours. Front Control
1.Press the On/Off Button
2.Press the Delay Start button. Continue pressing the Delay Start button until the LED display shows the number of hours of delay you desire.
3.Press the button for the desired wash
cycle. You can change the cycle at any time during the delay.
Top Control
1.Open the dishwasher door far enough to
expose the control buttons.
2.Press the On/Off Button
3.Press the Delay Start button. Continue pressing the Delay Start button until the LED displays shows the number of hours of
delay you desire.
4. Press the button for the desired wash
cycle. You can change the cycle at any time during the delay.
Top Rack Only Cycle
This cycte allows you to save energy, water, and detergent by washing loads small enough to fitl onty the upper rack. Note:
The Top Rack Only cycle does not reduce wash time.
To use the Top Rack Only Cycle:
1.Load the upper rack. Figure 33 shows a typical mixed toad placed correctly in the upper rack.
2.Press the On/Off button.
3.Press the button for the desired wash
cycle.
4. Press the Top Rack Only button.
OptiMISERTM
This feature, used in coejunctoe with the other wash cycles, reduces wash time by
about 30%. NOTE: OptiMISER TM is NOT used with the Quick Wash or Rinse and Hold
cycles.
To useOptiMISERTM:
1.Press the On/Off button.
2.Press the desired cycle selection button.
(Continued on Next Page)
Speciales I Caractisticas Especiales
