Figure 48/llus. 48
Figure 49/llus. 49
A Figure 50/llus. 50 B
Figure 51/llus. 51
English
(Care and Cleaning Continued) circle tabelted A in Figure 44.
4.Gentty putl the ring handle to ensure that the Assembly is tocked into ptace.
Check/Clean the Spray Arms Occasionally check the spray arms to ensure that the spray nozzles are clear and unobstructed. If the nozztes require cleaning, the spray arms are easy to remove and reinstall.
To remove the lower spray arm:
1.Pull the empty lower rack out of the dishwasher tub.
2.Grasp the lower spray arm, as shown in Figure 48, and gentty pull the lower spray arm upward, as shown in Figure 49.
If the spray nozzles need cleaning, flush them under running water,
To reinstall the lower spray arm:
1.Gentty press the lower spray arm back into its installed position.
To remove the upper spray arm:
1.Remove the empty upper rack from the dishwasher. The procedure for removing the
upper rack is on page 18 of this manual.
2.Turn the rack
3.Gently remove the spray arm, as shown in Figure 51.
If the spray nozzles need cleaning, flush them under running water.
To reinstall the upper spray arm:
1.Gentty press the upper spray arm back into its installed position.
2, Return the locking nut to its installed )osition and turn it 1/8 turn clockwise.
3, Return the upper rack to the upper rack rotter guides.
Check/Clean the Stainless Steel
Inner Door and Tub
Ctean the outer edges of the inside door panet regularly to remove food particles that cottect there from normal toading. If spots begin to appear on the stainless steel tub or inner door, make sure the rinse agent reservoir is full.
(Continued on Next Page)
48Care and Cleaning t Entretien et Nettoyage I Cuidado y Limpieza