English
(Operate the Controls, Continued)
Top Control
1. Open the dishwasher door far enough to expose the control buttons.
2. Press the On/Off button.
3. Press the button for wash cycle desired.
4. Close the dishwasher door and make
sure it is securely shut.
5. The dishwasher wilt start and automati-
cally continue operating until the end of the selected cycle.
_ILWARNING: YOU COULD BE SERI- OUSLY SCALDED IFYOU OPEN TH E
DISHWASHER DOOR QUICKLY DURING A WASH OR RINSE CYCLE. ALWAYS
WAIT AT LEAST 10 SECON DS (OR
UNTIL WATER NOISES STOP) BEFORE
FULLY OPENING THE DISHWASHER
DOOR.
Once you start the dishwasher, leave the dishwasher door shut until it finishes the
cycte. At the end of the cycle the dishwasher will stop. Depending on the model of dishwasher you have
• the"Ctean"lightwiltiltumninate,
• the LED display witt show"O",
• the dishwasherwittbeep
• the 'Sanitized" tight will illuminate When the "Sanitized" tight illuminates, it means that the wash cycle has met very strict requirements of time and temperature
for certification as 'Sanitized" by the National Sanitation Foundation. For more
information on this certification, turn the
section titled "The NSF Symbol" on page 7 in this manual.
Interrupting, Changing, and Cancelling Cycles
As a safety feature, the dishwasher witt automatically turn itsetf off whenever the door is opened.
Interrupting a Cycle Front Control
1. Press the On/Off button to stop operation.
2. Wait at least 10 seconds (or until
water noises stop) before opening the door.
3. To resume the cycle, close the dishwasher door and push the On/Off button
(Continued On Next Page)
30 | Operation J Fonctionnement I Operacibn |
