Bosch Appliances SHX33AI manual To Reinstall the Large Object Trap

Figure 44/llus. 44

Figure 45/llus. 45

Figure 46/llus. 46

Figure 47/llus. 47

English

(Care and Cleaning Continued) bucket or other appropriate receptacle.

Check/Clean the Large Object Trap Your Bosch dishwasher has a filter system

made up of a Large Object Trap/Cylinder FitterAssembty, as shown in Figure 45, and a Fine Filter on the ftoor of the dishwasher

tub, as shown in Figure 46. Some modets have an additional Micro Filter under the Fine

Filter, as shown in Figure 47. Check with the Modet Features Chart on page 6 of this manual to see if your model has the additional Micro Fitter. During normal use the filter system is self-cleaning. For your convenience the filter system is accessible and and easily cleaned.

The Large Object Trap prevents targe objects such as bones, gtass, toothpicks and straws from entering the pump system and causing damage or noise. Frequenfiy inspect the Large Object Trap and clean the filter system whenever you find foreign objects.

To Remove the Large Object Trap: Grasp the ring handle, as shown in Figure

44.Turn the ring handle counter-clockwise 1/4 turn and lift out the Large Object Trap/ Micro Filter Assembly, as shown in Figure 45.

,_WARNING: DO NOT REACH INTO THE LARGE OBJECT TRAP, AS IT MAY CONTAIN SHARP OBJECTS.

2.Carefully examine the Large Object Trap.

3.If you find debris in the Large Object Trap, turn it upside-down and gently tap it on a surface such as a countertop to dislodge and remove the debris. Flush the Large Object Trap clean by holding it under running water.

4.You may also remove the other filter system components, as shown in Figures

46and 47, and flush them clean by holding them under running water.

To Reinstall the Large Object Trap:

1.If you have removed the other filter

system components, return them to their 31aces, Micro Filter first (if your model has

it), Fine Filter second, and the Large Object Trap/Cylinder Fitter Assembty last.

2.Firmly press the Large Object Trap/Fine Filter Assembly into position.

3.Turn the ring handle clockwise 1/4 turn until it is locked. The arrow on the ring handle and the arrow on the Fine Filter should point to each other, as shown in the

(Continued on Next Page)

46 Care and Cleaning t Entretien et Nettoyage I Cuidado y Limpieza